UV DTF Sticker Instructions
How to Apply UV-DTF Stickers
1. Prep Your Surface
When necessary, clean the surface of your item before applying the PermaSticker using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.
2. Preparing Your UV-DTF Sticker
Gently peel the two sheets apart, watching to ensure the whole design lifts off onto the top carrier sheet. Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, should be peeled more slowly. If parts don't lift, re-squeegee from behind, and attempt to peel again from a different angle.
3. Placing Your UV-DTF Sticker Onto Your Item
First, identify the placement area on your item. For smaller designs (4 inches & under), carefully place the design using two hands. For larger designs (6 inches & larger), apply from one side to the other to reduce bubbles and misalignment.
4. Completing the Transfer Process
After placing the design, firmly squeegee it 2–4 times. Peel off the clear film slowly, watching to ensure all elements stick. If any part is not adhering, lay the carrier sheet back down, re-squeegee, and try peeling from a different angle.